RF SAW Filter
Part Number Package Application Last Modified
861-RF881.5M-F

2.5 x 2.0 SMD

CDMA January 2010

PART NUMBER :
861-RF881.5M-F

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
Minimum Typical Maximum Units
Center Frequency (Fo) - - 881.5 - MHz
Insertion Loss 869.0 ~ 894.0 MHz - 2.3 3.0 dB
Attenuation
100.0 ~ 824.0 MHz
40 45 -  dB
824.0 ~ 849.0 MHz
35 44 -
914.0 ~ 970.0MHz
20 25 -
970.0 ~ 3000.0 MHz
40 55 -
3000.0 ~ 6000.0 MHz
35 50 -
Output Amplitude Balance (l S31/S21 l) - -1.0 +/-0.3 1.0 dB
Output Phase Balance (f(S31)-f(S21)+180) - -10 +/-0.9 10 degree
Source Impedance single ended * - 50 - ohm
Load Impedance balanced ended * - 200/18nH - ohm
VSWR 869.0 ~ 894.0 MHz - 1.7 2.2 dBp-p
Maximum DC Voltage - - - 5 V
Maximum Input Power (CDMA Signal) (Source Imp. 50ohms) - - 0 dBm
Storage Temperature - -40 - +85 C
Operating Temperature - -30 - +85 C
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground

C Balance Out
D Balance Out
E -
F -
G
-

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
861-RF881.5M-F

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map