RF SAW Filter
Part Number Package Application Last Modified
802-RF417.75M-A 3.0 x 3.0 SMD CDMA450(E-Band) January 2010

PART NUMBER :
802-RF417.75M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 417.75 - MHz
Insertion Loss 415.5 ~ 420.0 MHz - 2.1 2.8 dB
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 30 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
VSWR 415.5 ~ 420.0 MHz - 1.3 2.0 -
Max Input Power - - - 30 dBm
Attenuation 0.3 ~ 400.0 MHz 23.0 26.0 - dB
425.5 ~ 430.0 MHz 30.0 48.0 -
430.0 ~ 1700.0 MHz 20.0 25.0 -
1700.0 ~ 2000.0 MHz 15.0 20.0 -
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

Pin Layout
A Ground
B Output
C Ground
D Ground
E Input
F Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
802-RF417.75M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map