RF SAW Filter
Part Number Package Application Last Modified
805-RF434.42M-B

5.0 x 5.0 SMD

Remote Control January 2010

PART NUMBER :
805-RF434.42M-B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
Minimum Typical Maximum Units
Center Frequency (Fo) - - 434.42 - MHz
Insertion Loss 434.30 ~ 434.54 MHz - 2.0 4.5 dB
Attenuation:
10.0 ~ 415.0 MHz
45 50 -  dB
415.0 ~ 429.0 MHz
40 45 -
429.0 ~ 433.42 MHz
15 20 -
435.42 ~ 443.0 MHz
10 15 -
443.0 ~ 550.0 MHz
35 40 -
550.0 ~ 1000.0 MHz
45 50 -
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple 434.30 ~ 434.54 MHz - 1.0 2.0 -
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In

C Ground
D Ground
E Out
F Ground
G Ground
H Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
805-RF434.42M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map