RF SAW Filter
Part Number Package Application Last Modified
805-RF315.0M-B

5.0 x 5.0 SMD

Remote Control January 2010

PART NUMBER :
805-RF315.0M-B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
Minimum Typical Maximum Units
Center Frequency (Fo) - - 315.0 - MHz
Minimum Insertion Loss IL MIN 314.80 ~ 315.20 MHz - 3.0 5.0 dB
Attenuation
10.0 ~ 270.0 MHz
45 50 -  dB
270.0 ~ 309.0 MHz
35 40 -
309.0 ~ 314.0 MHz
15 20 -
316.0 ~ 335.0MHz
10 15 -
335.0 ~ 400.0 MHz
35 40 -
400.0 ~ 1000.0MHz
45 50 -
Passband Relative to IL MIN
314.75 ~ 315.24 MHz
- 1.5 3.0 dB
314.69 ~ 315.30 MHz-
- 2.0 6.0
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +105 C
Storage Temperature - -40 - +85 C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground

C Ground
D Ground
E Out
F Ground
G Ground
H Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
805-RF315.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map