RF SAW Filter
Part Number Package Application Last Modified
803-RF868.3M-A 3.8 x 3.8 SMD Wireless January 2010

PART NUMBER :
803-RF868.3M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 868.3 - MHz
Insertion Loss 868 ~ 868.78 MHz - 2.7 4.2 dB
DC Voltage - - - 0 V
Input Power - - - 0 dBm
Operating Temperature - -45 - +90 C
Storage Temperature - -45 - +90 C
Relative Passband 868 ~ 868.78MHz - 1.0 3.0 dB
867.9 ~ 868.88 MHz - 1.5 6.0
3dB Bandwidth - -45 - +90 C
Relative Attenuation
10 ~ 700 MHz 50 55 - dB
700 ~ 830 MHz 40 45 -
830 ~ 850 MHz 35 40 -
850 ~ 865.02 MHz 25 28 -
871 ~ 874.5 MHz 15 20 -
874.5 ~ 883 MHz 22 26 -
883 ~ 900 MHz 30 35 -
900 ~ 1000 MHz 40 45 -
Source Impedance single ended* - 117//3.7 - ohm//Pf
Load Impedance single ended* - 117//3.7 - ohm//pF
* No Matching Network. Ref pdf spec
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In

C Ground
D Ground
E Out
F Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
803-RF868.3M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map