RF SAW Filter
Part Number Package Application Last Modified
882-RF463.5M-D 3.0 x 3.0 SMD CDMA450 H-Band, Balanced RX January 2010

PART NUMBER :
882-RF463.5M-D

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 463.5 - MHz
Insertion Loss 461.3 ~ 465.8 MHz - 2.4 4.0 dB
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 25 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance balanced ended * - 100 - ohm
Attenuation 0.3 ~ 451.3 MHz 35 50 - dB
451.3 ~ 455.8 MHz 35 50 -
485.0 ~ 507.5 MHz 40 50 -
507.5 ~ 1200.0 MHz 40 55 -
1200.0 ~ 2000.0x MHz x x -
VSWR 461.3 ~ 465.8 MHz - 2.1 2.5 -
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

Pin Layout
A Ground
B In
C Ground
D Out
E Ground
F Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
882-RF463.5M-D

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map