RF SAW Filter
Part Number Package Application Last Modified
882-RF423.7M-B 3.0 x 3.0 SMD CDMA450 D-Band, Balanced RX January 2010

PART NUMBER :
882-RF423.7M-B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 423.7 - MHz
Insertion Loss 421.6 ~ 425.9 MHz - 2.3 4.0 dB
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 27 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance balanced ended * - 100 - ohm
Attenuation 0.3 ~ 411.6 MHz 40 50 - dB
411.6 ~ 415.9 MHz 35 48 -
442.0 ~ 600.0 MHz 40 47 -
600.0 ~ 1200.0 MHz 40 55 -
1200.0 ~ 2000.0 MHz 35 50 -
VSWR 421.6 ~ 425.9 MHz - 1.7 2.4 -
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

Pin Layout
A Ground
B In
C Ground
D Out
E Ground
F Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
882-RF423.7M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map