RF SAW Filter
Part Number Package Application Last Modified
864-RF2140.0M-F 1.4 x 2.0 SMD WCDMA RX January 2010

PART NUMBER :
864-RF2140.0M-F

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 2140.0 - MHz
Insertion Loss 2110.0 ~ 2170.0 MHz - 1.7 2.3 dB
Maximum DC Voltage - - - 4 V
Maximum Input Power - - - 10 dBm
Return Loss Input 2110.0 ~ 2170.0 MHz 8 12 - V
Return Loss Output 2110.0 ~ 2170.0 MHz 8 12 - dBm
Amplitude Balance 2110.0 ~ 2170.0 MHz -2.0 -0.7 ~ +0.9 2.0 V
Phase Balance 2110.0 ~ 2170.0 MHz -8.0 -3.0 ~ 0 8.0 dBm
Operating Temperature - -30 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance balanced ended * - 100 - ohm
Ripple 2110.0 ~ 2170.0 MHz - 0.6 1.5 dB
Attenuation D.C. ~ 849.0 MHz 45 55 - dB
849.0 ~ 1350.0 MHz 40 47 -
1350.0 ~ 1980.0 MHz 30 34 -
1980.0 ~ 2025.0 MHz 25 28 -
2215.0 ~ 2255.0 MHz 15 21 -
2255.0 ~ 2270.0 MHz 20 23 -
2275.0 ~ 2400.0 MHz 22 24 -
2400.0 ~ 3910.0 MHz 30 36 -
3910.0 ~ 6000.0 MHz 40 52 -
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground

C Balance Out (1)
D Ground
E Balance Out (2)

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
864-RF2140.0M-F

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map