RF SAW Filter
Part Number Package Application Last Modified
863-RF868.35M-F 3.8 x 3.8 SMD Remote Control January 2010

PART NUMBER :
863-RF868.35M-F

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 868.35 - MHz
Insertion Loss 868.0 ~ 868.78 MHz - 2.7 4.2 dB
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 0 dBm
Operating Temperature - -45 - +90 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 117//3.7 - ohm//pF
Load Impedance single ended * - 177//3.7 - ohm//pF
Relative Passband 868.0 ~ 868.78 MHz - 1.0 3.0 dB 
867.9 ~ 868.88 MHz - 1.5 6.0
Attenuation 10.0 ~ 700.0 MHz 50 55 - dB
700.0 ~ 830.0 MHz 40 45 -
830.0 ~ 850.0 MHz 35 40 -
850.0 ~ 865.02 MHz 25 28 -
871.0 ~ 874.5 MHz 15 20 -
874.5 ~ 883.0 MHz 22 26 -
883.0 ~ 900.0 MHz 30 35 -
900.0 ~ 1000.0 MHz 40 45 -
3dB Bandwidth - - 1500 - KHz
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In

C Ground
D Ground
E Ground
F Ground
G Out
H Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
863-RF868.35M-F

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map