RF SAW Filter
Part Number Package Application Last Modified
863-RF433.92M-A 3.8 x 3.8 SMD Remote Control January 2010

PART NUMBER :
863-RF433.92M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 433.92 - MHz
Insertion Loss 433.80 ~ 434.12 MHz - 1.9 2.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Ripple 433.76 ~ 434.16 MHz - 1.0 2.0 dB
Attenuation 10.0 ~ 414.0 MHz 45 50 - dB
414.0 ~ 428.0 MHz 35 45 -
428.0 ~ 432.92 MHz 15 20 -
434.92 ~ 442.0 MHz 10 15 -
442.0 ~ 550.0 MHz 25 32 -
550.0 ~ 1000.0 MHz 45 50 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In

C Ground
D Ground
E Out
F Ground
G Ground
H Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
863-RF433.92M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map