RF SAW Filter
Part Number Package Application Last Modified
862-RF243.95M-A 3.0 x 3.0 SMD PHS IF January 2010

PART NUMBER :
862-RF243.95M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 243.95 - MHz
Insertion Loss at Fo - - 3.0 4.0 dB
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 5 dBm
Operating Temperature - -10 - +60 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo±100 KHz - 0.4 1.0 dB
Group Delay Ripple Fo±100 KHz - 0.4 1.0 µsec
Attenuation Fo ± 600 KHz 25 30 - dB
Fo ± 10.7 KHz 40 60 -
Fo ± 21.4 KHz 60 65 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

Ground

C In
D Ground
E Ground
F Ground
G Out
H Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
862-RF243.95M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map