RF SAW Filter
Part Number Package Application Last Modified
805-RF868.3M-A 5.0 x 5.0 SMD Remote Control January 2010

PART NUMBER :
805-RF868.3M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 868.3 - MHz
Insertion Loss 868.0 ~ 868.78 MHz - 2.7 4.2 dB
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 0 dBm
Operating Temperature - -45 - +90 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 117//3.7 - ohm//pF
Load Impedance single ended * - 117//3.7 - ohm//pF
Relative Passband 868.0 ~ 868.78 MHz - 1.0 3.0 dB
867.9 ~ 868.88 MHz - 1.5 6.0
Relative Attenuation 10.0 ~ 700.0 MHz 50 55 - dB
700.0 ~ 830.0 MHz 40 45 -
830.0 ~ 850.0 MHz 35 40 -
850.0 ~ 865.02 MHz 25 28 -
871.0 ~ 874.5 MHz 15 20 -
874.5 ~ 883.0 MHz 22 26 -
883.0 ~ 900.0 MHz 30 35 -
900.0 ~ 1000.0 MHz 40 45 -
3dB Bandwidth - - 1500 - KHz
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground

C Ground
D Ground
E Out
F Ground
G Ground
H Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
805-RF868.3M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map