RF SAW Filter
Part Number Package Application Last Modified
805-RF315.0M-B 5.0 x 5.0 SMD Remote Control January 2010

PART NUMBER :
805-RF315.0M-B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 315.0 - MHz
Minimum Insertion Loss 314.8 ~ 315.2 MHz, ILmin - 3.0 5.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 0 dBm
Operating Temperature - -40 - +105 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband (relative to ILmin) 314.75 ~ 315.24 MHz - 1.5 3.0 dB 
314.69 ~ 315.30 MHz - 2.0 6.0
Attenuation 10.0 ~ 270.0 MHz 45 50 - dB
270.0 ~ 309.0 MHz 35 40 -
309.0 ~ 314.0 MHz 15 20 -
316.0 ~ 335.0 MHz 10 15 -
335.0 ~ 400.0 MHz 35 40 -
400.0 ~ 1000.0 MHz 45 50 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground

C Ground
D Ground
E Out
F Ground
G Ground
H Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
805-RF315.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map