RF SAW Filter
Part Number Package Application Last Modified
805-RF173.15M-A 5.0 x 5.0 SMD Wireless January 2010

PART NUMBER :
805-RF173.15M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 173.15 - MHz
Insertion Loss 173.025 ~ 173.275 MHz - 1.6 2.5 dB
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 13 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Ripple 173.025 ~ 173.275 MHz - 0.2 1.0 dB
Attenuation D.C. ~ 163.0 MHz 45 58 - dB
163.0 ~ 165.0 MHz 40 55 -
165.0 ~ 170.15 MHz 30 40 -
177.15 ~ 182.0 MHz 35 45 -
182.0 ~ 400.0 MHz 35 40 -
Return Loss 173.025 ~ 173.275 MHz 10 13 - dB
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In

C Ground
D Ground
E Ground
F Out
G Ground
H Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
805-RF173.15M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map