RF SAW Filter
Part Number Package Application Last Modified
805-RF139.264M-A 5.0 x 5.0 SMD Wireless January 2010

PART NUMBER :

805-RF139.264M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 139.264 - MHz
Maximum Insertion Loss - - 4.0 6.0 dB
Phase Variation fN ± 15ppm - ±22 ±30 C
Absolute Attenuation 0.30 ~ 120.00 MHz 40 50 - dB
120.00 ~ 133.12 MHz 24 28 -
133.12 ~ 136.12 MHz 13 17 -
136.12 ~ 137.00 MHz 5 9 -
141.50 ~ 143.00 MHz 13 20 -
143.00 ~ 147.00 MHz 18 25 -
147.00 ~ 155.00 MHz 28 33 -
155.00 ~ 223.32 MHz 35 45 -
Temperature coefficient of frequency - - -32 - ppm/K
Band width - - 1.5 - MHz
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 0 dBm
Operating Temperature - -5 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance balanced ended * - 100 - ohm
Load Impedance balanced ended * - 100 - ohm
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground

C Out
D Ground
E Out
F Ground
G In
H Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
805-RF139.264M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map