RF SAW Filter
Part Number Package Application Last Modified
802-RF433.92M-C 3.0 x 3.0 SMD Wireless January 2010

PART NUMBER :
802-RF433.92M-C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 433.92 - MHz
Insertion Loss 433.05 ~ 434.79 MHz - 2.5 3.0 dB
Amplitude Ripple 433.05 ~ 434.79 MHz - 0.5 1.0 dBp-p
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 15 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Ripple 890.0 ~ 392.0 MHz - 0.8 1.5 dB
Attenuation 389.0 ~ 410.5 MHz 50 60 - dB
411.0 ~ 414.0 MHz 45 52 -
422.0 ~ 425.0 MHz 35 45 -
443.0 ~ 446.0 MHz 15 18 -
454.0 ~ 457.0 MHz 35 48 -
475.0 ~ 479.0 MHz 45 55 -
VSWR 433.05 ~ 434.79 MHz - 1.4 2.0 -
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

Pin Layout
A Ground
B Out or In
C Ground
D Ground
E In or Out
F Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
802-RF433.92M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map