RF SAW Filter
Part Number Package Application Last Modified
802-RF881.5M-B 3.0 x 3.0 SMD CDMA Rx Apr. 12 2003
.
TYPE :
881.5 MHz RF SAW Filter

PART NUMBER :
802-RF881.5M-B
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 881.5 - MHz
Insertion Loss 869.0 ~ 894.0 MHz - 2.8 3.5 dB
DC Voltage - - - 5 V
Input Power - - - 15 dBm
Operating Temperature - -30 - +65 C
Storage Temperature - -40 - +85 C
Ripple 869.0 ~ 894.0 MHz - 0.7 1.6 dB
Stopband Attenuation DC ~ 779MHz 50.0 57.0 - dB
779.0 ~ 849.0 MHz 45.0 49.0 -
914.0 ~ 970.0 MHz 28.0 33.0 -
970.0 ~ 1049.0 MHz 50.0 62.0 -
1049.0 ~ 2000.0 MHz 40.0 46.0 -
VSWR 869.0 ~ 894.0 MHz - 1.7 2.0 -
Teminating Impedance - - 50 - ohm
* Maximum Rating (Ta=25C)
** Custom SAW RF Filters available. Contact Oscilent for assistance.
.

Pin Layout
A Ground
B Output
C Ground
D Ground
E Input
F Ground
Frequency Reponse
VSWR (S11, S22)
Smith Chart
Oscilent Corporation - CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com
Part No.:
802-RF881.5M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map