RF SAW Filter
Part Number Package Application Last Modified
802-RF1575.42M-A 3.0 x 3.0 SMD GPS Apr. 12 2003
.
TYPE :
1575.42 MHz RF SAW Filter

PART NUMBER :
802-RF1575.42M-A
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 1575.42 - MHz
Insertion Loss 1574.22 ~ 1576.62 MHz - 1.85 2.0 dB
DC Voltage - - - 0 V
Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Amplitude Ripple 1574.22 ~ 1576.62 MHz - 0.15 1.0 dB
Stopband Attenuation DC ~ 1450.0MHz 35.0 39.0 - dB
1450.0 ~ 1500.0 MHz 30.0 38.0 -
1625.0 ~ 1640.0 MHz 40.0 48.0 -
1640.0 ~ 2000.0 MHz 30.0 37.0 -
2000.0 ~ 3000.0 MHz 30.0 30.9 -
VSWR 1574.22 ~ 1576.62 MHz - 1.3 2.0 -
Teminating Impedance - - 50 - ohm
* Maximum Rating (Ta=25C)
** Custom SAW RF Filters available. Contact Oscilent for assistance.
.

Pin Layout
A Ground
B Output
C Ground
D Ground
E Input
F Ground
Frequency Reponse
VSWR (S11, S22)
Smith Chart
Oscilent Corporation - CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com
Part No.:
802-RF1575.42M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map