IF SAW Filter
Part Number Package Application Last Modified
873-IF190.0M-E 3.8 x 3.8mm SMD Base Station & Repeater Apr 18, 2007
.
TYPE :
190.0 MHz Bandpass Filter
WCDMA Application

PART NUMBER :
873-IF190.0M-E
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 190.0 - MHz
Insertion Loss at Fo - 5.0 7.0 dB
Source Impedance* - 50/1000 - ohm
Load Impedance)* - 50/1000 - ohm
Operating Temperature Range 0 - +70 C
Storage Temperature Range -20 - +85 C
Relative Attenuation: - - - -
from +-5.0MHz to +/-7.5MHz 10.0 19.0 - dB
from +/-7.5MHz to +/-12.5MHz 25 33 - dB
from +/-12.5MHz to +/-15MHz 35 37 - dB
from +/-15Mhz to +/-100MHz 40 43 - dB
Amplitude Ripple within Fo +/-2.0MHz - 0.9 2.0 dBp-p
Ultimate Rejection 50 55 - dB
Group Delay Ripple (Fo +/-2.0MHz) - 70 100 nsec
Input Power Level - +10 - dBm
*Single Ended/Balanced with Matching Network (Reference Testing Environment Circuit as shown) Modify Impedance Values as necessary.
.
PACKAGE(mm)
TEST FIXTURE

 
FREQUENCY RESPONSE


Part No.:
873-IF190.0M-E

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map