IF SAW Filter
Part Number Package Application Last Modified
835-IF223.936M-A 35.0 x 12.8mm Base Station & Repeater January 2011

PART NUMBER :
835-IF223.936M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 223.936 - MHz
Insertion Loss at Fo - 22.5 25.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.0 dB - 1.72 - MHz
Bandwidth at -3.0 dB - 1.89 - MHz
Bandwidth at -40.0 dB - 2.55 - MHz
Ultimate Rejection 50 55 - dB
Amplitude Ripple - 0.8 1.2 dBp-p
Group Delay Variation (smo 0.5%) - 200 - nsec
Absolute Delay at Fo - 3.91 - µsec
Temperature Coefficient - -0.03 - ppm/C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF223.936M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map