IF SAW Filter
Part Number Package Application Last Modified
835-IF160.0M-L 35 x 12.8mm Base Station & Repeater Apr 18, 2007
.
TYPE :
140.0 MHz Bandpass Filter
Through Hole Package

PART NUMBER :
835-IF160.0M-L
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 159.9 160.0 160.1 MHz
Insertion Loss at Fo - 30.4 31.5 dB
Operating Temperature Range -30 - +70 C
Storage Temperature Range -40 - +85 C
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.5 dB 13.9 14.12 - MHz
Bandwidth at -3.0 dB 14.1 14.29 - MHz
Bandwidth at -40.0 dB - 15.38 15.6 MHz
Ultimate Rejection 50 55 - dB
Amplitude Ripple (Fo +/-6.875MHz) - 0.65 1.0 dBp-p
Group Delay Variation (Fo +/-6.875MHz) - 50 100 nsec
Absolute Delay at Fo - 3.52 - µsec
Temperature Coefficient - -20 - ppm/C
*With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary.
.
PACKAGE OUTLINE (mm) TEST FIXTURE

 
FREQUENCY RESPONSE
Part No.:
835-IF160.0M-L

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map