IF SAW Filter
Part Number Package Application Last Modified
820-IF87.2M-A 20.18 x12.58mm Base Station & Repeater January 2011

PART NUMBER :
820-IF87.2M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 87.14 87.20 87.26 MHz
Insertion Loss - 20.5 24.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth 1.0 dB - 7.6 - MHz
Bandwidth 3.0 dB 7.8 8.0 - MHz
Bandwidth 40.0 dB - 9.7 9.8 MHz
Passband Ripple (Fo +/- 3MHz) - 0.5 1.0 dB
Group Delay Variation - 70 150 nsec
Absolute Delay - 2.28 - µsec
Substrate Material - LN - -
Ambient Temperature - 25 - C
Ultimate Rejection 50 55 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, E, F Ground
A In
D Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF87.2M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map