IF SAW Filter
Part Number Package Application Last Modified
820-IF82.5M-BB 20.2 x 12.6mm IF SAW Filter Apr 18, 2007
TYPE :
82.5 MHz Bandpass Filter
 

PART NUMBER :
820-IF82.5M-BB
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 82.5 - MHz
Insertion Loss at Fo - 24.2 26.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.0 dB 18.0 18.1 - MHz
Bandwidth at -3.0 dB 18.4 18.5 - MHz
Bandwidth at -35.0 dB - 19.9 20.0 MHz
Bandwidth at -40.0 dB - 20.0 20.1 MHz
Amplitude Ripple - 0.5 1.0 dBp-p
Ultimate Rejection 50 55 - dB
Group Delay Variation - 35 60 nsec
Absolute Delay at Fo - 2.25 - µsec
Temperature Coefficient - -72 - ppm/C
*With Matching Network (Reference Testing Environment Circuit as shown) Modify Impedance Values as necessary.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


PIN Descriptions In-1, Out-5, Ground-2,3,4,6

Frequency Responce
Part No.:
820-IF82.5M-BB

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map