IF SAW Filter
Part Number Package Application Last Modified
820-IF82.5M-BA 20.2 x 12.6mm Base Station & Repeater January 2011

PART NUMBER :
820-IF82.5M-BA

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 82.5 - MHz
Insertion Loss at Fo - 24.2 26.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.0 dB 17.9 18.0 - MHz
Bandwidth at -3.0 dB 18.3 18.4 - MHz
Bandwidth at -35.0 dB - 19.8 19.9 MHz
Bandwidth at -40.0 dB - 19.9 20.0 MHz
Amplitude Ripple - 0.5 1.0 dBp-p
Ultimate Rejection 50 55 - dB
Group Delay Variation - 30 60 nsec
Absolute Delay at Fo - 2.2 - µsec
Temperature Coefficient - -72 - ppm/C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF82.5M-BA

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map