IF SAW Filter
Part Number Package Application Last Modified
820-IF120.0M-C 20.2 x 12.6mm IF SAW Filter Apr 18, 2007
.
TYPE :
120.0 MHz IF SAW Filter
 

PART NUMBER :
820-IF120.0M-C
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) 119.94 120.0 120.06 MHz
Insertion Loss at Fo - 22.2 24.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.0 dB - 19.95 - MHz
Bandwidth at -3.0 dB 20.25 20.35 - MHz
Bandwidth at -35.0 dB - 21.70 - MHz
Bandwidth at -40.0 dB - 21.80 22.0 MHz
Amplitude Ripple - 0.75 1.0 dBp-p
Ultimate Rejection 50 55 - dB
Group Delay Variation - 50 100 nsec
Absolute Delay at Fo - 2.2 - µsec
Temperature Coefficient - -72 - ppm/C
*With Matching Network (Reference Testing Environment Circuit as shown) Modify Impedance Values as necessary.
.
PACKAGE OUTLINE (mm)

PIN Descriptions IN-1, Out-5, Ground-2,3,4,6
TESTING ENVIRONMENT
Frequency Response
Part No.:
820-IF120.0M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map