IF SAW Filter
Part Number Package Application Last Modified
813-SL96.0M-35 13.3 x 6.5mm SMD Base Station & Repeater Apr 18, 2007
.
TYPE :
96.00 MHz Filter
36.00 MHz Bandwidth

PART NUMBER :
813-SL96.0M-35
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 96.0 - MHz
Insertion Loss - 16.8 18.5 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth -1.0 dB 35.0 36.0 - MHz
Bandwidth -3.0 dB 36.0 36.8 - MHz
Bandwidth -30.0 dB - 40.0 41.0 MHz
Amplitude Ripple (Fo +/- 2.5MHz) - 0.4 0.7 dBp-p
Amplitude Ripple - 1.2 2.0 dBp-p
Group Delay Variation - 65 120 nsec
Group Delay Variation (Fo +/- 2.5MHz) - 38 70 nsec
Absolute Delay - 0.942 - µsec
Relative Attenuation 40 47 - dB
Ambient Temperature - 25 - C
Temperature Coefficient - -94 - ppm/C
*With Matching Network(ref. Testing Enirovnment Circut as shown below)
*Custom parameters available. Contact Oscilent Sales for discussion.
.
PACKAGE OUTLINE (mm) TEST FIXTURE

 


PIN Descriptions: IN-11, OUT-5, GROUND- 1,2,3,4,6,7,8,9,10,12

L1 = 68nH L2 = 56pF
L3 = 56nH L4 = 68pF
Source/Load Impedance = 50 ohms
Frequency Responce
Part No.:
813-SL96.0M-35

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map