IF SAW Filter
Part Number Package Application Last Modified
813-SL70.0M-05 13.3 x 6.5mm SMD Base Station & Repeater January 2011

PART NUMBER :
813-SL70.0M-05

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.8 70.00 70.2 MHz
Insertion Loss - 8.5 9.2 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth 1.0 dB 4.4 4.8 - MHz
Bandwidth 3.0 dB 5.2 5.6 - MHz
Bandwidth 35.0 dB - 8.5 9.0 MHz
Passband Ripple - 0.6 1.0 dB
Group Delay Variation - 95 150 nsec
Absolute Delay - 0.84 - µsec
Substrate Material - YZ-LN - -
Ambient Temperature - 25 - C
Ultimate Rejection 40 42 - dB
Temperature Coefficient - -94 - ppm/C
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL70.0M-05

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map