IF SAW Filter
Part Number Package Application Last Modified
813-SL140.0M-28 13.3 x 6.5 SMD Base Station & Repeater January 2011

PART NUMBER :
813-SL140.0M-28

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 140.0 - MHz
Insertion Loss at Fo - 14.5 16.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.0 dB 27.5 28.0 - MHz
Bandwidth at -3.0 dB 28.5 29.0 - MHz
Bandwidth at -40.0 dB - 32.8 33.5 MHz
Relative Attenuation: -
Lower Sidelobe 45 50 - dB
Upper Sidelobe 45 50 - dB
Amplitude Ripple within +/-13.0 MHz - 0.45 1.0 dBp-p
Group Delay Variation (+/-13.0 MHz) - 50 80 nsec
Absolute Delay at Fo - 0.91 - µsec
Temperature Coefficient - -94 - ppm/C
IN/OUT Return Loss @ Fo - - - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL140.0M-28

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map