IF SAW Filter
Part Number Package Application Last Modified
813-SL140.0M-15 13.3 x 6.5 SMD Base Station & Repeater January 2011

PART NUMBER :
813-SL140.0M-15

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 139.8 140.0 140.2 MHz
Insertion Loss at Fo - 8.0 11.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.0 dB 13.6 13.8 - MHz
Bandwidth at -3.0 dB 14.8 15.05 - MHz
Bandwidth at -40.0 dB - 18.35 18.6 MHz
Bandwidth at -45.0 dB - 18.6 19.0 MHz
Relative Attenuation: -
Lower Sidelobe 45 48 - dB
Upper Sidelobe 40 45 - dB
Amplitude Ripple - 0.62 1.0 dBp-p
Group Delay Variation - 110 180 nsec
Absolute Delay at Fo - 0.98 - µsec
Temperature Coefficient - - -94 ppm/C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL140.0M-15

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map