IF SAW Filter
Part Number Package Application Last Modified
813-SL140.0M-10B 13.3 x 6.5 SMD Base Station & Repeater Apr 18, 2007
.
TYPE :
140.0 MHz Bandpass Filter
Low Loss

PART NUMBER :
813-SL140.0M-10B
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 139.85 140.0 140.15 MHz
Insertion Loss at Fo - 13.6 15.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.0 dB 9.1 9.3 - MHz
Bandwidth at -3.0 dB 9.9 10.1 - MHz
Bandwidth at -40.0 dB - 12.9 13.1 MHz
Bandwidth at -45.0 dB - 13.2 14.0 MHz
Relative Attenuation: -
Lower Sidelobe 45 48 - dB
Upper Sidelobe 41 45 - dB
Amplitude Ripple - 0.4 1.0 dBp-p
Group Delay Variation - 64 100 nsec
Absolute Delay at Fo - 0.97 - µsec
Temperature Coefficient - - -94 ppm/C
*With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary.
.
PACKAGE OUTLINE (mm) TEST FIXTURE

PIN Description IN-11,OUT-5,GROUND-1,2,3,4,6,7,8,9,10,12

 
FREQUENCY RESPONCE
Part No.:
813-SL140.0M-10B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map