IF SAW Filter
Part Number Package Application Last Modified
813-SL140.0M-10 13.3 x 6.5 SMD Base Station & Repeater January 2011

PART NUMBER :
813-SL140.0M-10

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 139.6 140.0 140.4 MHz
Insertion Loss at Fo - 10.5 11.5 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.5 dB 8.9 9.3 - MHz
Bandwidth at -3.0 dB 9.0 9.9 - MHz
Bandwidth at -35.0 dB - 13.5 14.5 MHz
Relative Attenuation: -
from 10 to 132 MHz 40 48 - dB
from 149 to 260 MHz 40 45 - dB
Amplitude Ripple within fo +/- 3.6MHz - 0.6 1.0 dBp-p
Group Delay Variation (Fo +/- 3.6MHz) - 100 150 nsec
Absolute Delay at Fo - 1.03 - µsec
Temperature Coefficient - -94 - ppm/C
In/Out Return Loss at Fo - - - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL140.0M-10

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map