IF SAW Filter
Part Number Package Application Last Modified
809-SL140.0M-18 9.1 x 4.8 SMD Base Station & Repeater January 2011

PART NUMBER :
809-SL140.0M-18

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 140.0 - MHz
Insertion Loss at Fo - 8.5 11.0 dB
Operating Temperature Range -30 - +80 C
Storage Temperature Range -40 - +85 C
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.0 dB 17.2 18.2 - MHz
Bandwidth at -3.0 dB 18.0 19.2 - MHz
Bandwidth at -35.0 dB - 22.8 25.0 MHz
Relative Attenuation: -
from 100 to 124 MHz 40 46 - dB
from 156 to 180 MHz 40 44 - dB
Amplitude Ripple - 0.6 1.0 dBp-p
Group Delay Variation - 55 100 nsec
Absolute Delay at Fo - 0.88 - µsec
Temperature Coefficient - -94 - ppm/C
In/Out Return Loss at Fo - - - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
1, 3, 4, 5, 6, 8, 9, 10 Ground
2 In
7 Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
809-SL140.0M-18

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map