IF SAW Filter
Part Number Package Application Last Modified
807-IF204.0M-A 7.0 x 5.0mm SMD Base Station & Repeater Apr 18, 2007
.
TYPE :
204.0 MHz Bandpass Filter
 

PART NUMBER :
807-IF204.0M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 204.0 - MHz
Insertion Loss at Fo - 9.2 11 dB
Source Impedance* - 50/500 - ohm
Load Impedance* - 50/1000 - ohm
Operating Temperature Range -10 - +70 C
Temperature Coefficient - 0.03 - ppm/C
Bandwidth at -1.0 dB 600 900 - kHz
Relative Attenuation: - - - -
from 194 MHz to 200 MHz 40 47 - dB
from 200MHz to 201.5MHz 40 45 - dB
from 206.5MHz to 209MHz 40 43 - dB
from 209MHz to 214MHz 40 46 - dB
Amplitude Ripple (203.7MHz ~ 204.3MHz) - 0.6 1.0 dBp-p
Absolute Delay at Fo - 0.75 - µsec
Group Delay Variation (203.7MHz ~ 204.3MHz) - 35 200 nsec
*Single Ended or Balanced with Matching Network (Reference Testing Environment Circuit as shown) Modify Impedance Values as necessary.
.
PACKAGE OUTLINE (mm)


TESTING ENVIROMENT
FREQUENCY RESPONSE
Part No.:
807-IF204.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map