IF SAW Filter
Part Number Package Application Last Modified
835-IF80.0M-B 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007
TYPE :
80.0 MHz Bandpass Filter
25.0 MHz Bandwidth

PART NUMBER :
835-IF80.0M-B
FREQUENCY CHARACTERISTICS
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 79.90 80.0 80.10 MHz
Insertion Loss - 25.0 27.0 dB
1dB Bandwidth 25.0 25.1 - MHz
3dB Bandwidth 25.35 25.42 - MHz
50dB Bandwidth - 26.72 26.90 MHz
Passband Ripple - 0.7 1.0 dB
Group Delay Variation - 40 100 nsec
Ultimate Rejection 50 55 - dB
Substrate Material - LN - -
Absolute Delay - 2.44 - usec
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
PACKAGE OUTLINE TEST FIXTURE


L1 = (120+27)nH C1 = 33pF
L2 = 120nH C2 = 30pF
Source/Load Impedance = 50 ohms
Part No.:
835-IF80.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map