IF SAW Filter
Part Number Package Application Last Modified
835-IF70.0M-PA 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007
TYPE :
70.0 MHz Bandpass Filter
20.55 MHz Bandwidth

PART NUMBER :
835-IF70.0M-PA
FREQUENCY CHARACTERISTICS
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.94 70.00 70.06 MHz
Insertion Loss - 23.5 26.0 dB
1dB Bandwidth 20.35 20.47 - MHz
3dB Bandwidth 20.55 20.75 - MHz
40dB Bandwidth - 21.81 22.00 MHz
Passband Ripple - 0.6 1.0 dB
Group Delay Variation - 70 150 nsec
Ultimate Rejection 55 60 - dB
Substrate Material - LN - -
Absolute Delay - 2.83 - usec
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
PACKAGE OUTLINE TEST FIXTURE


L1 = (150+8.2)nH C1 = 33pF
L2 = (82+82)nH C2 = 27pF
Source/Load Impedance = 50 ohms
Part No.:
835-IF70.0M-PA

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map