IF SAW Filter
Part Number Package Application Last Modified
835-IF218.64M-A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF218.6M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 218.640 - MHz
Insertion Loss - 23.2 25.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
1dB Bandwidth - 1.72 - MHz
3dB Bandwidth - 1.87 - MHz
40dB Bandwidth - 2.54 - MHz
Amplitude Ripple - 0.75 1.2 dBp-p
Group Delay Variation (smo 0.5%) - 180 - ns
Absolute Delay - 3.97 - µs
Ultimate Rejection 50 55 - dB
Temperature Coefficient - -0.03 - ppm/C
Ambient Temperature - 25 - C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF218.64M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map