IF SAW Filter
Part Number Package Application Last Modified
835-IF160.0M-K 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007
.
TYPE :
160.0 MHz Bandpass Filter
 

PART NUMBER :
835-IF160.0M-K
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) 159.9 160.0 160.1 MHz
Insertion Loss at Fo - 23.7 26.0 dB
Storage Temperature -40 - +85 C
Operating Temperature -30 - +70 C
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -0.03 - ppm/C
Amplitude Ripple (Fo+/-1.875 MHz) - 0.5 1.0 dBp-p
Bandwidth at 1.0 dB 4.0 4.24 - MHz
Bandwidth at 3.0 dB 4.2 4.42 - MHz
Bandwidth at 40.0 dB - 5.09 5.3 MHz
Ultimate Rejection - 50 - dB
Group Delay Variation (Fo+/-1.875 MHz) - 130 200 ns
Adsolute Delay at Fo - 3.19 - us
* with Matching Network (Ref. Testing Environment Circut as shown below). Those impedances could be modified with different impedances values and/or structures, if necessary.
** Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm)
PIN Descriptions: IN-1, OUT 5, GROUND -2,3,4,6,Case
 
TEST ENVIRONMENT
Source & Load Impedance: 50 ohm
 
FREQUENCY RESPONSE
Part No.:
835-IF160.0M-K

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map