IF SAW Filter
Part Number Package Application Last Modified
835-IF160.0M-H 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007
TYPE :
160.0 MHz Bandpass Filter
4.20 MHz Bandwidth

PART NUMBER :
835-IF160.0M-H
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 160.0 - MHz
Insertion Loss at Fo - 22.5 25.0 dB
Bandwidth at 1.0 dB 4.00 4.05 - MHz
Bandwidth at 3.0 dB 4.20 4.26 - MHz
Bandwidth at 40.0 dB - 4.96 5.2 MHz
Passband Ripple - 0.75 1.0 dB
Group Delay Variation - 160 300 nsec
Adsolute Delay - 5.25 - usec
Substrate Material - LN - -
** Custom SAW IF Filters available. Contact Oscilent for assistance.
** It need to PKG ground for more Excellent Spurious levels.
PACKAGE OUTLINE (mm)
TEST ENVIRONMENT
L1 = 15 nH
L2 = 15 nH
C1 = 43 pF
C2 = 36 pF
Source & Load Impedance: 50 ohm
Part No.:
835-IF160.0M-H

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map