IF SAW Filter
Part Number Package Application Last Modified
821-IF115.0M-C 20 x9.8 SMD 115MHz IF SAW Filter January 2011

PART NUMBER :
821-IF115.0M-C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) 114.9 115.0 115.1 MHz
Insertion Loss - 22.0 24.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -72 - ppm/C
Amplitude Ripple within fo+/-12.49Mhz - 0.65 1.0 dBp-p
1dB Bandwidth - 26.0 - MHz
3dB Bandwidth 26.1 26.5 - MHz
40dB Bandwidth - 28.6 29.0 MHz
50 - - dB
50 - - dB
Absolute Delay - 1.64 - µsec
Group Delay Variation - 30 100 nsec
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF115.0M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map