IF SAW Filter
Part Number Package Application Last Modified
820-IF70.0M-B 20.2 x 12.6 Thru Hole Base Station & Repeater Jan. 01, 2007
.
TYPE :
70.0 MHz Bandpass Filter
9.5 MHz Bandwidth

PART NUMBER :
820-IF70.0M-B
.
FREQUENCY CHARACTERISTICS
Horizontal : 2.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 1.2 MHz/Div
Veritical : 1.0 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.94 70 70.06 MHz
Insertion Loss - 26.0 29.0 dB
1dB Bandwidth 8.9 9.1 - MHz
3dB Bandwidth 9.2 9.5 - MHz
40dB Bandwidth - 10.98 11.0 MHz
Passband Ripple - 0.78 1.0 dB
Group Delay Variation - 80 100 nsec
Absolute Delay - 2.45 - µsec
Ultimate Rejection 50 60 - dB
Substrate Material - YZ-LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE
   


Source/Load Impedance = 50 ohms
Part No.:
820-IF70.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map