IF SAW Filter
Part Number Package Application Last Modified
820-IF160.0M-F 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-IF160.0M-F

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) 159.95 160.00 160.05 MHz
Insertion Loss at Fo - 19.0 22.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
1.5dB Bandwidth 1.26 1.35 - MHz
3.0dB Bandwidth 1.40 1.50 - MHz
35.0dB Bandwidth - 2.25 2.40 MHz
50.0dB Bandwidth - 2.38 2.50 MHz
Passband Ripple Fo +/- 0.5 MHz - 0.6 1.0 dBp-p
Group Delay Variation Fo +/- 0.63 MHz - 180 300 nsec
Absolute Delay - 2.5 - µsec
Rejection 162 ~167 MHz 50 55 - dB
Ultimate Rejection Fo-9.0~Fo-2.0MHz 50 55 - dB
Ultimate Rejection Fo+2.0~Fo+9.0MHz 50 55 - dB
Maximum DC Voltage - - 10 V
Maximum Input Power - - 10 dBm
Operating Temperature Range -40 - +85 C
Storage Temperature Range -60 - +85 C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, E, F Ground
A In
D Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF160.0M-F

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map