IF SAW Filter
Part Number Package Application Last Modified
819-IF70.0M-RA 19 x 6.5 SMD Bandpass Filter January 2011

PART NUMBER :
819-IF70.0M-RA

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.97 70.0 70.03 MHz
Insertion Loss - 20.0 22.0 dB
1dB Bandwidth 1.26 1.30 - MHz
Attenuation at Fo+/-1.25MHz 40 45 - MHz
Attenuation at Fo+/-1.70MHz 40 45 - dB
40dB Bandwidth - 2.36 2.36 MHz
Passband Ripple at Fo+/-0.5MHz - 0.8 1.0 dB
Phase Linearity - 1.54 2.00 deg/rms
Group Delay Variation - 250 500 nsec
Absolute Delay - 2.6 - µsec
Ultimate Rejection 40 50 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, E, G, H, I, J Ground
A In
F Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
819-IF70.0M-RA

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map