IF SAW Filter
Part Number Package Application Last Modified
813-IF99.84M-A 13.3 x 6.5 SMD IF SAW Filter Jan. 01, 2007
TYPE :
99.84MHz IF SAW Filter

PART NUMBER :
813-IF99.84M-A
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 99.84 - MHz
Insertion Loss at Fo - 9 12 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -0.03 - ppm/C
Amplitude Ripple - - 1.0 dBp-p
260 375 - KHz
- 770 930 KHz
- 1.58 1.69 MHz
Relative Attenuation: -
10MHz~ 98.1 MHz
45 52 - dB
101.2MHz~ 150 MHz
45 50 - dB
Operating Temperature - - - C
Absolute Delay at Fo - 1.68 - us
Group Delay Variation - - 200 ns
*With Matching Network (Ref. Testing Environment Circuit as Shown Below).
Those impedances could be modified with different impedance values and/or structures, if necessary
PACKAGE OUTLINE (mm)
TEST CIRCUIT
TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm
INPUT: L1: 180 nH Q>40; C1: 47 pF
OUTPUT: L2: 180 nH Q>40; C2: 62 pF
FREQUENCY RESPONSE
Part No.:
813-IF99.84M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map