IF SAW Filter
Part Number Package Application Last Modified
813-SL95.0M-15 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL95.0M-15

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 95.0 - MHz
Insertion Loss at Fo - 12.5 15.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -94 - ppm/C
Amplitude Ripple - 0.50 1.0 dBp-p
1.0dB Bandwidth - 14.0 - MHz
3.0dB Bandwidth 14.2 14.5 - MHz
5.0dB Bandwidth - 14.9 15.2 MHz
30.0dB Bandwidth - 16.9 17.5 MHz
40.0dB Bandwidth - 17.2 18.5 MHz
Relative Attenuation: 40 48 - dB
Group Delay Variation - 50 120 ns
Absolute Delay at Fo - 1.15 - us
Ambient Temperature - 25 - C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL95.0M-15

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map