IF SAW Filter
Part Number Package Application Last Modified
813-SL70.0M-06 13.3 x 6.5 SMD IF SAW Filter Jan. 01, 2007

PART NUMBER :
813-SL70.0M-06

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) 69.8 70.0 70.2 MHz
Insertion Loss at Fo - 8.2 9.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -94 - ppm/C
Amplitude Ripple within fo +/-2.1MHz - 0.7 1.0 dBp-p
1dB Bandwidth 5.2 5.6 - MHz
3dB Bandwidth 6.0 6.5 - MHz
40dB Bandwidth - 9.5 10.0 MHz
Relative Attenuation: -
from 10 to 64.5 MHz 40 45 - dB
from 75.5 to 140MHz 40 45 - dB
Absolute Delay at Fo - 0.85 - us
IN/OUT Return Loss at Fo - - - dB
Group Delay Variation/ fo +/-2.0MHz - 110 150 ns
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL70.0M-06

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map