IF SAW Filter
Part Number Package Application Last Modified
813-SL70.0M-04 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL70.0M-04

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) 69.8 70.0 70.2 MHz
Insertion Loss at Fo - 8.5 10.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -94 - ppm/C
Amplitude Ripple within fo +/1.5MHz - 0.8 1.0 dBp-p
1dB Bandwidth - 3.68 - MHz
3dB Bandwidth - 4.46 - MHz
40dB Bandwidth - 7.18 - MHz
Relative Attenuation: -
from 10 to 64.5MHz 40 45 - dB
from 74 to 140MHz 40 43 - dB
Absolute Delay at Fo - 1.0 - us
IN/OUT Return Loss at Fo - - - dB
Group Delay Variation/ fo +/-1.5MHz - 180 - us
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL70.0M-04

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map