IF SAW Filter
Part Number Package Application Last Modified
813-SL70.0M-03 13.3 x 6.5 SMD Base Station & Repeater January 2011

PART NUMBER :
813-SL70.0M-03

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.85 70.0 70.15 MHz
Insertion Loss - 7.7 8.2 dB
1dB Bandwidth 2.4 2.85 - MHz
3dB Bandwidth 3.0 3.55 - MHz
40dB Bandwidth - 6.18 6.8 MHz
Passband Ripple - 0.65 1.0 dB
Group Delay Variation - 145 190 nsec
Absolute Delay - 1.07 - usec
Ultimate Rejection 40 45 - dB
Substrate Material - YZ-LN - -
Ambient Temperature - 25 - C
Temperature Coefficient - -94 - ppm/C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL70.0M-03

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map