IF SAW Filter
Part Number Package Application Last Modified
813-IF68.75M-A 13.3 x 6.5 SMD Base Station & Repeater Jan. 01, 2007
.
TYPE :
68.75 MHz Bandpass Filter
12.0 MHz Bandwidth

PART NUMBER :
813-IF68.75M-A
.
FREQUENCY CHARACTERISTICS
Horizontal : 3.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 2.0 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 68.70 68.75 68.80 MHz
Insertion Loss - 21.8 24.0 dB
1dB Bandwidth 11.3 11.6 - MHz
3dB Bandwidth 12.0 12.1 - MHz
40dB Bandwidth - 14.3 15.0 MHz
Passband Ripple - 0.7 1.0 dB
Group Delay Variation - 40 100 nsec
Phase Linearity - 5.0 7.0 deg
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 56nH - -
L2 = 100nH - -
Source/Load Impedance = 50 ohms
Part No.:
813-IF68.75M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map