IF SAW Filter
Part Number Package Application Last Modified
813-SL60.0M-21 13.3 x 6.5 SMD IF SAW Filter Jan 01, 2007
TYPE :
60.0MHz IF SAW Filter

PART NUMBER :
813-SL60.0M-21
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 60.0 - MHz
Insertion Loss at Fo - 24.7 26.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -94 - ppm/C
Amplitude Ripple (Fo+/-10 MHz) - 0.7 1.0 dBp-p
1dB Bandwidth 20.0 21.2 - MHz
Relative Attenuation: -
Fo+/-9.50 MHz - 0 - dB
Fo+/-10.90 MHz - 1.5 - dB
Fo+/-19.5 MHz 38 45 - dB
Fo+/20MHz 38 45 - dB
Fo+/-40 MHz 40 45 - dB
From DC to Fo - 29.5 MHz 40 45 - dB
From Fo+29.75 to 100MHz 40 43 - dB
Absolute Delay at Fo - 0.93 - us
Group Delay Variation (Fo+/-10MHz) - 30 70 ns
Operating Temp -45 - +85 C
Storage Temp -45 - +85 C
*With Matching Network (Ref. Testing Environment Circuit as Shown Below).
Those impedances could be modified with different impedance values and/or structures, if necessary
PACKAGE OUTLINE (mm)
TEST CIRCUIT
TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm
INPUT: L1: 120 nH Q>40
OUTPUT: L2: 150 nH Q>40; C2: 20 pF
FREQUENCY RESPONSE
Part No.:
813-SL60.0M-21

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map