IF SAW Filter
Part Number Package Application Last Modified
813-SL60.0M-11 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL60.0M-11

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 60.0 - MHz
Insertion Loss at Fo - 11.8 13.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -94 - ppm/C
Amplitude Ripple (Fo+/-5 MHz) - 0.4 1.0 dBp-p
1dB Bandwidth 10.0 12.0 - MHz
Relative Attenuation: -
Fo+/-4.75 MHz - 0 - dB
Fo+/-5.54 MHz - 0 - dB
Fo+/-9.75 MHz 40 45 - dB
Fo+/10MHz 40 48 - dB
Fo+/-20 MHz 45 55 - dB
From DC to Fo 14.75 MHz 40 45 - dB
From Fo+14.75 to 120MHz 40 45 - dB
Absolute Delay at Fo - 1.1 - us
Group Delay Variation (Fo+/-5MHz) - 38 70 ns
Operating Temp -45 - +85 C
Storage Temp -45 - +85 C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL60.0M-11

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map